Solve the Problems Printer Brother 2170

Problems Printer Brother 2170

Like any laser jet printer, the Brother HL -2170W has its problems, some of which are permanent and some of which you can fix. Brother released the 2170 printer in 2007, but as of 2011 the printer is discontinued.

However, you can still buy the printer in the second-hand market, such as from online auction sites. According to the online product review resource, CNET Reviews, the Brother 2170 has a “compact form factor” and allows “fast text document printing.” However, it has “poor graphics quality. "Print quality

Poor Print Quality

The poor print quality of the Brother 2170 is an issue that users cannot remedy. According to CNET Reviews, while the printer performs well when it comes to print text, the printer cannot handle “the smallest graphics jobs.”

Specifically, the Brother 2170 produces severe grid lines in them. transition zones between the different elements of the image. In areas that should be shielded, or filled with dark colors, the printer produces tape profiles.

Other image quality issues arise when printing small photos. These problems include blurring in the shaded parts of photographs as well as an overall digital or pixelated effect.

Paper jam

Just like any printer, the Brother 2170 can occasionally succumb to a paper jam, causing its current printing job to stop. Fortunately, the Brother Solutions Center offers several strategies for clearing the Brother 2170 of a paper jam. For example, you can open the front cover of the printer and remove the drum unit and toner cartridge assembly.

If the jammed paper does not come out with the mount, you can join in and pull out. If this strategy fails, remove the brother from the 2170 paper tray and pull the jammed paper down and out. Another strategy for clearing a jam is to open the printer cover back, open the fuser cover to the inside by pulling out the tab and then removing the jammed paper from the fuser.

If this does not clear the jam yet, push down the green lever, remove the toner cartridge from the drum unit, and remove the paper from the drum unit.

Through the paper Photos

In some cases, the paper that Brother 2170 prints on may come out askew or off-center. This is probably a loading problem.

To prevent the problem from reoccurring, make sure you load the paper in the tray correctly, which involves adjusting the paper guides on the tray so that the guides fit the width of the paper you plan to print. on.

Otherwise, you may be able to correct the problem by selecting the correct paper size setting from the printer driver.

Printer takes a long time

If Brother 2170 takes a long time to print the first page of a document, it could be the result of a print job with a large volume of data or a print job with a high print resolution.

You can remedy this problem by reducing the size of the job data or degrading the resolution, but these actions could adversely affect print quality.

Another strategy is to extend the duration of the printer before going into "sleep" mode of the printer driver. When Brother 2170 is in "sleep mode", the printer takes some time to warm up before it can start printing.